School is back in swing and eBeam wants to help your school get the most interactive technology with your new technology budget.  Receive a FREE Inscribe tablet when  you purchase 3 eBeam Edge for Education Projection USB units.  Promo runs from 9/1/11 to 11/30/11.  Purchases must be through an authorized eBeam reseller.  All Purchase Orders must reference promo code “3FOR1“.  To receive your FREE Inscribe tablet, mail a copy of your original invoice and product serial numbers to:

Please allow 4-6 weeks after receipt of your original invoice for delivery on your FREE tablet.  Offer is for US customers only.  The 3 Edge for Education Projection USB units must be combined on one Purchase Order only.  Limit to 9 units per PO.

Order any eBeam products this month and receive FREE shipping!   Receive free shipping in September on the eBeam Edge, Engage, Inscribe Tablet and eBeam Stylus.  Promotion for US orders only.  Offer good between 9/1/11 and 9/28/11.  Be sure to reference “FREESHIP” on your Purchase Order.

eBeam Promotion is good for a limited time only, May 1 – June 15, 2011.  Use promo code MAYSTOCK on PO to receive discount.  Happy Spring from eBeam!

• Purchase an eBeam Edge for Education through an authorized eBeam reseller.
• Register your product within 10 days of receipt here.
• Once registered, you’ll receive a registration confirmation email.  Forward that confirmation email to insidesales@luidia.com with REBATE in the title.  Include your organization name, your name and the mailing address.

Rebate is good for up to 5 units purchased per school.  For more details on the rebate, click here.

From September 15 to October 15, 2010, those who purchase an eBeam Edge for Education can receive a $100 rebate!  For more details on the promotion and to sign up for your $100 rebate click HERE.  Rebate is good for up to 5 units per school while supplies last.

1. Is my eBeam Edge USB glowing green on the front of the receiver? The green light indicates the unit is getting power.  No light -> call tech support.

2. Check the position of the eBeam Edge on the whiteboard. Make sure the receiver is at least one inch away from the projected image.

3. Check the AAA battery in your stylus. When you touch the tip of the stylus and press down, you should hear a slight buzzing sound.  No buzzing sound -> replace battery.

4. Turn off the lights before you calibrate. Occasionally overhead fluorescent lighting can interfere with the infrared technology in the eBeam.

——If you have gone through these steps and your eBeam Edge is still not calibrating, continue with these next steps—–

5. Restart your computer. Rebooting your computer will resolve 99% of all eBeam technical issues.

6. Try another USB port on your computer. Try a port that you use regularly and know is working correctly.

7. Reinstall the eBeam software. Click HERE to download the most current eBeam software.

8. Try another computer. Take your eBeam Edge USB and your USB cable and connect to a different computer.

Once you have completed these eight troubleshooting steps and are still not able to calibrate, please call tech support with your results.

1. Download the latest eBeam Interact Software for Mac and Windows HERE.

2. Download the latest eBeam Inscribe Driver for Mac and Windows HERE.

3. Insert the Lithium battery into the back of the tablet and connect the USB cable from the tablet to your computer.  The tablet will begin charging as the blue light indicates on the front of the tablet.

4. Insert the AAA battery into the stylus.

5. Remove the RF receiver from the back of the tablet and plug directly into your computer’s USB port.  The receiver must be connected to your computer in order to use the tablet.

6.  To pair your computer with your new tablet, first turn on the tablet by pressing the ON/OFF button on the upper left corner of the tablet.

7. You will now see icons on the LCD screen.  The tablet should read “000″.

8. Press and hold the red “connect” button on the back of your eBeam tablet and the button on your RF receiver at the same time.

9.  The “000″ on the LCD screen will begin flashing.  Keep holding the two buttons at the same time until you see the “000″ flash to “001″.

10.  As soon as you see the number change to  “001″, let go.

11. Turn off the tablet by pressing the ON/OFF button on the upper left corner of the tablet.

12. Turn on the tablet.  You should see “001″ on the LCD screen as well as a wireless symbol above the number.

Your tablet is now paired to your computer.  You will not have to repair it again.  When you want to use your wireless tablet, simply turn on the tablet and move the stylus around the pad until it has control of the computer’s mouse.

TROUBLESHOOTING TIP: There is a certain order that you need to follow when turning on your tablet and opening the eBeam software.  Always turn your tablet on first and then open the eBeam software.  The shortcut keys on the tablet will not work if you open your Scrapbook software first before connecting your tablet.  When the eBeam Scrapbook software opens, it talks to the shortcut keys on the eBeam tablet.  If the software is already open and then you turn on your tablet, exit the software and turn off your tablet.  Turn your tablet on first and then reopen the software to access the shortcut keys on the tablet.